.

.gitignore

@@ -1,5 +1,6 @@
 /.idea
 /__pycache__/
 *ARCHIV*
-*BAK*
 *BACKUP*
+out
+cfg_inlay_PUTx.xlsx

BAK/241031_def.yml

@@ -0,0 +1,47 @@
+general:
+  yolovar: int
+  initpic_name: puppy.png
+
+groups:
+  inlay:
+    parameter:
+      x_num: int
+      x_offset: double
+      y_num: int
+      y_offset: double
+      kos: str
+    cfg:
+      picture_name: img_inlay.png
+  wp_raw:
+    parameter:
+      x_wpraw: double
+      y_wpraw: double
+      z_wpraw: double
+      h_grp_wpraw: double
+    cfg:
+      picture_name: img_wpraw.png
+  wp_fin:
+    parameter:
+      x_wpfin: double
+      y_wpfin: double
+      z_wpfin: double
+      l_wpfin: double
+      h_grp_wpfin: double
+    cfg:
+      picture_name: img_wpfin.png
+  clp:
+    parameter:
+      clp_offset: double
+      y_prb_floor1: double
+      z_prb_floor1: double
+      y_prb_floor2: double
+      z_prb_floor2: double
+      x_prb_backen: double
+      z_prb_backen: double
+      l_prb_backen: double
+      y_prb_seite: double
+      z_prb_seite: double
+      
+      
+    cfg:
+      picture_name: img_clp.png

EXEC_MAIN.ps1

@@ -7,7 +7,7 @@ $scriptPath = "./MAIN.py"
 $username = [System.Environment]::UserName
 
 # Construct the path to the Python executable
-$pythonExe = "C:\Users\$username\AppData\Local\miniconda3\envs\$venvName\python.exe"
+$pythonExe = "C:\Users\user58\.conda\envs\$venvName\python.exe"
 
 # Execute the Python script
 & $pythonExe $scriptPath

MAIN.py

@@ -1,5 +1,4 @@
 # main.py
-
 from functions import *
 from funct_inlay import *
 from funct_wp import *
@@ -34,7 +33,7 @@ def setup_group(frame, group_name, data, input_vars, selected_params, group_widg
     param_var = selected_params[group_name]  # Bind the dropdown to the corresponding selected_param entry
     param_dropdown = ttk.Combobox(frame, textvariable=param_var, values=param_values)
     group_widgets[group_name] = {"param_dropdown": param_dropdown}  # Save for later reference
-    source_path = f"{folder_pictures}/{data['general']['initpic_name']}"
+    source_path = f"{folder_pictures}/{data['general']['notavailablepic_name']}"
 
     # Handle missing picture case
     if not os.path.exists(picture_path):
@@ -55,10 +54,8 @@ def setup_group(frame, group_name, data, input_vars, selected_params, group_widg
             picture_to_use = picture_path
             if grpnm == "inlay":
                 generate_picture_inlay(all_group_vars, picture_to_use)
-            elif grpnm == "wp_raw":
-                generate_picture_wpraw(all_group_vars, picture_to_use)
-            elif grpnm == "wp_fin":
-                generate_picture_wpfin(all_group_vars, picture_to_use)
+            elif grpnm == "wp":
+                generate_picture_wp(all_group_vars, picture_to_use)
             elif grpnm == "grp":
                 generate_picture_grp(all_group_vars, picture_to_use)
             elif grpnm == "clp":
@@ -275,7 +272,7 @@ def setup_evaluation(root, folder_pictures, data, folder_output, input_vars, sel
     frame.grid(row=2, column=0, columnspan=5, padx=10, pady=10, sticky="nsew")
 
     # Load and display the specific initial picture
-    picture_path = f"{folder_pictures}/{data['general']['initpic_name']}"
+    picture_path = f"{folder_pictures}/{data['general']['generatorpic_name']}"
     group_image_tk = load_image(picture_path, 200)  # Assuming a function load_image exists and works as expected
     image_label = ttk.Label(frame, image=group_image_tk)
     image_label.image = group_image_tk  # Keep a reference to avoid garbage collection
@@ -284,12 +281,20 @@ def setup_evaluation(root, folder_pictures, data, folder_output, input_vars, sel
     # Function to generate configuration file based on current parameters
     def btn_gen():
         generate_config_spf(folder_output, input_vars, selected_params)
+    def btn_gen_custom1():
+        generate_config_spf_custom1(folder_output, input_vars, selected_params)
+    def btn_gen_custom2():
+        generate_config_spf_custom1(folder_output, input_vars, selected_params, filetransfer=True)
 
     # Place buttons in the vertical frame for operations
     button_frame = ttk.Frame(frame)
     button_frame.grid(row=0, column=1, padx=10, pady=10, sticky="n")
-    button1 = ttk.Button(button_frame, text="GENERATE DMUAUT_CFG.SPF FILE", width=45, command=btn_gen)
+    button1 = ttk.Button(button_frame, text="GEN CFG_DMUAUT.SPF FILE", width=45, command=btn_gen)
     button1.grid(row=0, column=0, padx=10, pady=5)
+    button2 = ttk.Button(button_frame, text="GEN CFG_INLAY.SPF FILE", width=45, command=btn_gen_custom1)
+    button2.grid(row=1, column=0, padx=5, pady=5)
+    button3 = ttk.Button(button_frame, text="GEN+TRANSFER CFG_INLAY.SPF FILE", width=45, command=btn_gen_custom2)
+    button3.grid(row=1, column=1, padx=5, pady=5)
 
     root.grid_columnconfigure(0, weight=1)
 

README.md

@@ -1 +1,29 @@
-v1.3
+# README
+
+## Beschreibung
+Diese GUI dient zur Erfassung verschiedener Parameter für die Maschinenautomatisierung mittels Roboterbestückung.
+
+## Funktionen
+- Erfassung von Parametern für:
+  - **Inlay**
+  - **Werkstück Roh- und Fertigmaße (WP Raw & Finish)**
+  - **Schraubstock**
+- Verwaltung von Parameter-Sets und Jobs
+- Erstellung einer ausführbaren G-Code-Datei mit allen erfassten Parametern
+- Möglichkeit zur direkten Übertragung der G-Code-Datei auf die Steuerung
+
+## Verwendung
+1. Parameter eingeben oder bestehende Sets laden
+2. Parameter-Sets speichern oder löschen
+3. Job auswählen oder erstellen
+4. G-Code-Datei generieren und optional auf die Steuerung übertragen
+
+---
+# CHANGELOG
+v2
+ - Beschränkung nur auf Inlay, Werkstück, Schraubstock
+ - neue Parameter definiert und Abhängigkeit implementiert
+ - Generator für die Visualisierung komplett überarbeitet
+ - neue Platzhalter-Bilder 
+
+

_condaenv.yml

@@ -8,3 +8,9 @@ dependencies:
   - jsonschema
   - tk
   - pillow
+  - pandas
+  - openpyxl
+  - paramiko
+  - matplotlib
+  - trimesh
+  - manifold3d

cfg_parsets/clp.yml

@@ -1,4 +1,9 @@
 clp1:
-  clp_offset: '0'
-clp2:
-  clp_offset: '0'
+  CLP_AUFLAGETIEFE: '3'
+  CLP_BACKENHOHE: '30'
+  CLP_BACKENWEITE: '30'
+  CLP_SPANNHOHE: '5'
+  MESSPOS_TOL: '0'
+  MESSPOS_X: '0'
+  MESSPOS_Y: '0'
+  MESSPOS_Z: '0'

cfg_parsets/grp.yml

@@ -1,28 +0,0 @@
-grp1:
-  h_offset: '30'
-  h_step: '10'
-  hub: '50'
-  steps_num: '5'
-  w_offset: '40'
-  w_step: '45'
-grp2:
-  h_offset: '30'
-  h_step: '5'
-  hub: '10'
-  steps_num: '6'
-  w_offset: '20'
-  w_step: '10'
-grp3:
-  h_offset: '10'
-  h_step: '25'
-  hub: '10'
-  steps_num: '5'
-  w_offset: '25'
-  w_step: '45'
-newset:
-  h_offset: '10'
-  h_step: '25'
-  hub: '10'
-  steps_num: '5'
-  w_offset: '25'
-  w_step: '45'

cfg_parsets/inlay.yml

@@ -1,12 +1,10 @@
-inlay7:
-  kos: '4'
-  x_num: '4'
-  x_offset: '30'
-  y_num: '3'
-  y_offset: '30'
-inlay_kleinteil:
-  kos: '4'
-  x_num: '7'
-  x_offset: '5'
-  y_num: '4'
-  y_offset: '4'
+<<new par set>>:
+  INL_X_NUM: '10'
+  INL_X_OFFSET: '50'
+  INL_Y_NUM: '10'
+  INL_Y_OFFSET: '50'
+inlay1:
+  INL_X_NUM: '10'
+  INL_X_OFFSET: '10'
+  INL_Y_NUM: '10'
+  INL_Y_OFFSET: '10'

cfg_parsets/jobs.yml

@@ -1,7 +1,6 @@
 job1:
   clp: clp1
-  grp: grp1
-  inlay: inlay7
+  inlay: inlay1
   wp_fin: wpfin1
   wp_raw: wpraw1
 job3:

cfg_parsets/wp.yml

@@ -0,0 +1,9 @@
+wp1:
+  WPF_X: '15'
+  WPF_Y: '20'
+  WPF_Z: '15'
+  WPR_X: '20'
+  WPR_Y: '20'
+  WPR_Z: '20'
+  WP_CLP_OFFSET_X: '5'
+  WP_GRP_OFFSET_Z: '5'

cfg_parsets/wp_fin.yml

@@ -1,5 +0,0 @@
-wpfin1:
-  l_wpfin: '8'
-  x_wpfin: '20'
-  y_wpfin: '10'
-  z_wpfin: '13'

cfg_parsets/wp_raw.yml

@@ -1,8 +0,0 @@
-test:
-  x_wpraw: '20'
-  y_wpraw: '10'
-  z_wpraw: '20'
-wpraw1:
-  x_wpraw: '10'
-  y_wpraw: '10'
-  z_wpraw: '20'

def.yml

@@ -1,44 +1,38 @@
 general:
   yolovar: int
-  initpic_name: puppy.png
+  notavailablepic_name: cat_wondering.png
+  generatorpic_name: dog_progr.png
 
 groups:
   inlay:
     parameter:
-      x_num: int
-      x_offset: double
-      y_num: int
-      y_offset: double
-      kos: str
+      INL_X_NUM: int
+      INL_X_OFFSET: double
+      INL_Y_NUM: int
+      INL_Y_OFFSET: double
     cfg:
       picture_name: img_inlay.png
-  wp_raw:
+  wp:
     parameter:
-      x_wpraw: double
-      y_wpraw: double
-      z_wpraw: double
+      WPR_X: double
+      WPR_Y: double
+      WPR_Z: double
+      WPF_X: double
+      WPF_Y: double
+      WPF_Z: double
+      WP_CLP_OFFSET_X: double
+      WP_GRP_OFFSET_Z: double
     cfg:
-      picture_name: img_wpraw.png
-  wp_fin:
-    parameter:
-      x_wpfin: double
-      y_wpfin: double
-      z_wpfin: double
-      l_wpfin: double
-    cfg:
-      picture_name: img_wpfin.png
-  grp:
-    parameter:
-      hub: double
-      h_offset: double
-      h_step: double
-      w_offset: double
-      w_step: double
-      steps_num: int
-    cfg:
-      picture_name: img_grp.png
+      picture_name: img_wp.png
   clp:
     parameter:
-      clp_offset: double
+      CLP_BACKENWEITE: double
+      CLP_BACKENHOHE: double
+      CLP_SPANNHOHE: double
+      CLP_AUFLAGETIEFE: double
+      MESSPOS_X: double
+      MESSPOS_Y: double
+      MESSPOS_Z: double
+      MESSPOS_TOL: double
     cfg:
       picture_name: img_clp.png

funct_clp.py

@@ -1,130 +1,116 @@
 import matplotlib.pyplot as plt
-from mpl_toolkits.mplot3d.art3d import Poly3DCollection
-import numpy as np
+from functions import *
 
 
 def generate_picture_clp(all_group_vars, picture_path, DEBUG=False):
-    try:
-        # Get x_wpraw, y_wpraw, and z_wpraw values
-        vars = all_group_vars['wp_raw']
-        x_wpraw = float(vars['x_wpraw'])
-        y_wpraw = float(vars['y_wpraw'])
-        z_wpraw = float(vars['z_wpraw'])
-        x_cube = x_wpraw*2
-        y_cube = y_wpraw*2
-        z_cube = z_wpraw
-        clp_offset = float(all_group_vars['clp']['clp_offset'])
+    vars = all_group_vars['clp']
+    CLP_BACKENWEITE, CLP_BACKENHOHE, CLP_SPANNHOHE, CLP_AUFLAGETIEFE = (float(vars[k]) for k in
+                                                                        ['CLP_BACKENWEITE', 'CLP_BACKENHOHE',
+                                                                         'CLP_SPANNHOHE', 'CLP_AUFLAGETIEFE'])
 
-        # ERROR HANDLING
-        if x_cube <= 0 or y_cube <= 0 or z_cube <= 0:
-            raise ValueError("x_wpraw, y_wpraw, and z_wpraw must be positive values.")
+    WPR_X = CLP_BACKENWEITE/2
+    WPR_Y = CLP_BACKENWEITE/2
+    WPR_Z = CLP_SPANNHOHE * 5
 
-        # Define the vertices of the cube based on wpraw dimensions
-        vertices = (np.array([[0, 0, 0], [x_cube, 0, 0], [x_cube, y_cube, 0], [0, y_cube, 0],
-                             [0, 0, z_cube], [x_cube, 0, z_cube], [x_cube, y_cube, z_cube], [0, y_cube, z_cube]])
-                    + np.array([0, -clp_offset, 0]))
+    if min(WPR_X, WPR_Y, WPR_Z) <= 0:
+        raise ValueError("Dimensions must be positive.")
 
-        # Define the 6 faces of the cube
-        faces = [[vertices[j] for j in [0, 1, 2, 3]],  # Bottom face
-                 [vertices[j] for j in [4, 5, 6, 7]],  # Top face
-                 [vertices[j] for j in [0, 3, 7, 4]],  # Left face
-                 [vertices[j] for j in [1, 2, 6, 5]],  # Right face
-                 [vertices[j] for j in [0, 1, 5, 4]],  # Front face
-                 [vertices[j] for j in [2, 3, 7, 6]]]  # Back face
+    fig, ax = plt.subplots(subplot_kw={'projection': '3d'})
 
-        # Plot the cube in 3D
-        fig = plt.figure()
-        ax = fig.add_subplot(111, projection='3d')
+    # Define raw workpiece dimensions
+    x_cube, y_cube, z_cube = 2 * WPR_X, 2 * WPR_Y, WPR_Z
+    vertices_raw = np.array([[0, 0, 0], [x_cube, 0, 0], [x_cube, y_cube, 0], [0, y_cube, 0],
+                             [0, 0, WPR_Z], [x_cube, 0, WPR_Z], [x_cube, y_cube, WPR_Z], [0, y_cube, WPR_Z]])
+    faces_raw = [vertices_raw[[0, 1, 2, 3]], vertices_raw[[4, 5, 6, 7]], vertices_raw[[0, 3, 7, 4]],
+                 vertices_raw[[1, 2, 6, 5]], vertices_raw[[0, 1, 5, 4]], vertices_raw[[2, 3, 7, 6]]]
 
-        # Plot the cube with the specified faces
-        ax.add_collection3d(Poly3DCollection(faces, facecolors='k', linewidths=1, edgecolors='k', alpha=.15))
-
-        # Set the aspect ratio for each axis
+    # Set axis properties
     ax.set_box_aspect([x_cube, y_cube, z_cube])
+    ax.set(xticks=[], yticks=[], zticks=[])
 
-        # Hide the axis ticks and labels
-        ax.set_xticks([])  # Hide X axis ticks
-        ax.set_yticks([])  # Hide Y axis ticks
-        ax.set_zticks([])  # Hide Z axis ticks
+    # Draw WP coordinate system
+    axis_len = max(x_cube, y_cube, z_cube) * 0.2
+    colors = ['r', 'g', 'b']
+    origin_x = 0
+    origin_y = 0
+    origin_z = 0
+    for i, vec in enumerate(np.eye(3)):
+        ax.quiver(origin_x, origin_y, origin_z, *(axis_len * vec), color=colors[i], linewidth=3)
+    ax.text(origin_x, origin_y, origin_z - axis_len * 0.3, 'WP', color='black', fontsize=9, weight='bold', ha='center',
+            va='top')
 
-        # Add a ball (sphere) at the center of the cube
-        ball_radius = min(x_wpraw, y_wpraw, z_wpraw) * 0.1  # Size relative to cube dimensions
+    # Draw WP
+    ax.add_collection3d(Poly3DCollection(faces_raw, facecolors='k', linewidths=1, edgecolors='k', alpha=.15))
 
-        u = np.linspace(0, 2 * np.pi, 20)
-        v = np.linspace(0, np.pi, 20)
-        x_sphere = x_wpraw + ball_radius * np.outer(np.cos(u), np.sin(v))
-        y_sphere = y_wpraw - clp_offset + ball_radius * np.outer(np.sin(u), np.sin(v))
-        z_sphere = z_wpraw + ball_radius * np.outer(np.ones(np.size(u)), np.cos(v))
-        ax.plot_surface(x_sphere, y_sphere, z_sphere, color='red', alpha=1)
+    # Draw CLP coordinate system
+    axis_len = max(x_cube, y_cube, z_cube) * 0.15
+    colors = ['r', 'g', 'b']
+    origin_x = WPR_X
+    origin_y = WPR_Y
+    origin_z = 0
+    for i, vec in enumerate(np.eye(3)):
+        ax.quiver(origin_x, origin_y, origin_z, *(axis_len * vec), color=colors[i], linewidth=3)
+    ax.text(origin_x, origin_y, origin_z - axis_len * 0.3, 'CLP', color='blue', fontsize=9, weight='bold', ha='center',
+            va='top')
 
-        # Add the origin sparrow (a small 3D marker at the origin)
-        max_size = max(x_cube, y_cube, z_cube) * 0.2  # Scale the arrows relative to the smallest dimension
-        ax.quiver(0, -clp_offset, 0, max_size, 0, 0, color='red', linewidth=2, label='X-axis')  # Red arrow for X-axis
-        ax.quiver(0, -clp_offset, 0, 0, max_size, 0, color='green', linewidth=2, label='Y-axis')  # Green arrow for Y-axis
-        ax.quiver(0, -clp_offset, 0, 0, 0, max_size, color='blue', linewidth=2, label='Z-axis')  # Blue arrow for Z-axis
+    # Define clamping block dimensions
+    clp_deep = y_cube * 0.3
+    base_x = WPR_X - CLP_BACKENWEITE / 2
+    alpha = 0.35
+    color = 'blue'
+    linewidth = 1
 
-        # Add two black blocks (greifer fingers) on the Y-faces in the middle of the cube height
-        max_size2 = max(x_cube, y_cube, z_cube) * 0.4  # Scale the arrows relative to the smallest dimension
-        ax.bar3d(-max_size2, -(2.0-1)/2 * y_cube, -z_wpraw * 0.0,
-                 max_size2, 2.0 * y_cube, z_wpraw * 0.2,
-                 color='black', alpha=.10)
-        ax.bar3d(-max_size2, -(2.0-1)/2 * y_cube, -z_wpraw * 0.0,
-                 max_size2+3, 2.0 * y_cube, -z_wpraw * 0.2,
-                 color='black', alpha=.10)
+    # Draw clamping blocks
+    x = base_x
+    dx = CLP_BACKENWEITE
+    y = 0
+    dy1 = clp_deep
+    dy2 = CLP_AUFLAGETIEFE
+    z = 0
+    dz1 = CLP_SPANNHOHE
+    dz2 = CLP_BACKENHOHE
+    plot_clamping(ax, x, y, z, dx, dy1, dy2, dz1, dz2, color=color,
+                  alpha=alpha, linewidth=linewidth)
+    y = y_cube
+    plot_clamping(ax, x, y, z, dx, dy1, dy2, dz1, dz2, color=color,
+                  alpha=alpha, linewidth=linewidth, inverty=True)
 
-        ax.bar3d(x_cube, -(2-1)/2 * y_cube, -z_wpraw * 0.0,
-                 max_size2, 2.0 * y_cube, z_wpraw * 0.2,
-                 color='black', alpha=.10)
-        ax.bar3d(x_cube-3, -(2-1)/2 * y_cube, -z_wpraw * 0.0,
-                 max_size2+3, 2.0 * y_cube, -z_wpraw * 0.2,
-                 color='black', alpha=.10)
+    # Draw text for geometry values
+    ax.text(0, 2*WPR_Y+clp_deep, CLP_SPANNHOHE/2, f'{CLP_SPANNHOHE}mm', color='blue', fontsize=9, weight='bold', ha='right', va='center')
+    ax.text(0, 2*WPR_Y+clp_deep, -CLP_BACKENHOHE/2, f'{CLP_BACKENHOHE}mm', color='blue', fontsize=9, weight='bold', ha='right', va='center')
+    ax.text(WPR_X, 2*WPR_Y+clp_deep, CLP_SPANNHOHE, f'{CLP_BACKENWEITE}mm', color='blue', fontsize=9, weight='bold', ha='right', va='center')
+    ax.text(WPR_X*2, 2*WPR_Y-CLP_AUFLAGETIEFE/2, 0, f'{CLP_AUFLAGETIEFE}mm', color='blue', fontsize=9, weight='bold', ha='left', va='bottom')
 
-        # Add the origin sparrow (a small 3D marker at the origin)
-        max_size3 = max(x_cube, y_cube, z_cube) * 0.3  # Scale the arrows relative to the smallest dimension
-        ax.quiver(x_wpraw, y_wpraw, 0, max_size3, 0, 0, color='red', linewidth=3, label='X-axis')  # Red arrow for X-axis
-        ax.quiver(x_wpraw, y_wpraw, 0, 0, max_size3, 0, color='green', linewidth=3, label='Y-axis')  # Green arrow for Y-axis
-        ax.quiver(x_wpraw, y_wpraw, 0, 0, 0, max_size3, color='blue', linewidth=3, label='Z-axis')  # Blue arrow for Z-axis
-
-        # Set viewing angle
-        ax.view_init(elev=30, azim=-150)  # Set elevation to 24° and azimuth to -151°
-        # ax.view_init(elev=90, azim=180)  # Set elevation to 24° and azimuth to -151°
-
-        # Set limits for the axes
-        # ax.set_xlim([0, x_cube])
-        # ax.set_ylim([0, y_cube])
-        # ax.set_zlim([0, z_cube])
-
-        # Set equal aspect ratio to make grid cells look square
-        ax.set_aspect('equal')
+    # Set view properties
+    z_trans = WPR_Z
+    zoom_factor = 1.5  # Adjust this factor to zoom out more or less
+    ax.view_init(elev=30, azim=-160)
+    ax.set_xlim([-x_cube * zoom_factor * 0.1, x_cube * zoom_factor])
+    ax.set_ylim([-y_cube * zoom_factor * 0.1, y_cube * zoom_factor])
+    ax.set_zlim([-WPR_Z * zoom_factor * 0.1 - z_trans, WPR_Z * zoom_factor - z_trans])
+    ax.set_aspect('auto')
+    ax.grid(False)  # Remove grid lines
+    ax.set_xticks([])
+    ax.set_yticks([])
+    ax.set_zticks([])
+    for axis in [ax.xaxis, ax.yaxis, ax.zaxis]:
+        axis.set_pane_color((1, 1, 1, 0))  # Hide background panes
+        axis.line.set_color((1, 1, 1, 0))  # Hide axis lines
 
+    # Save or display the plot
     if not DEBUG:
-            # Save the figure to the specified picture path
-            fig.savefig(picture_path, bbox_inches='tight', pad_inches=0.1, dpi=300, transparent=True)
+        fig.savefig(picture_path, bbox_inches='tight', dpi=300, transparent=True)
     else:
         plt.show()
-
-        # Close the figure to free memory
     plt.close()
 
-    except ValueError as ve:
-        # Handle value error (e.g., invalid input)
-        print(f"Invalid Input: Error: {ve}")
-
-    except Exception as e:
-        # Catch any other exceptions and show a generic error message
-        print(f"An error occurred while generating the 3D cube: {e}")
-
 
 # Example use-case
 if __name__ == "__main__":
     all_group_vars = {
-        'wp_raw': {
-            'x_wpraw': '10',   # Example values for testing
-            'y_wpraw': '15',
-            'z_wpraw': '20'
-        },
-        'clp': {
-            'clp_offset': '4'
+        'CLP_BACKENWEITE': 25,
+        'CLP_BACKENHOHE': 20,
+        'CLP_SPANNHOHE': 3,
+        'CLP_AUFLAGETIEFE': 3
     }
-    }
-    generate_picture_clp(all_group_vars, 'output_image.png', DEBUG=True)
+    generate_picture_clp({'clp': all_group_vars}, "cfg_picture/TEST_wpraw.jpg", DEBUG=True)

funct_gen.py

@@ -2,9 +2,13 @@
 
 import os
 import time
+import pandas as pd
+import paramiko
+import yaml
+import shutil
 
 
-# Function to generate the DMUAUT_CFG.SPF configuration file and save selected parameter sets
+# Function to generate the CFG_DMUAUT.SPF configuration file and save selected parameter sets
 def generate_config_spf(folder_output, input_vars, selected_params):
     # Get the current timestamp for folder name (format: YYMMDD_HHmmSS)
     timestamp = time.strftime("%y%m%d_%H%M%S")
@@ -15,7 +19,7 @@ def generate_config_spf(folder_output, input_vars, selected_params):
         os.makedirs(folder_path)
 
     # Define the file path for the SPF configuration file
-    spf_file_path = os.path.join(folder_path, "DMUAUT_CFG.SPF")
+    spf_file_path = os.path.join(folder_path, "CFG_DMUAUT.SPF")
 
     # Generate the SPF file content
     with open(spf_file_path, "w") as spf_file:
@@ -42,5 +46,87 @@ def generate_config_spf(folder_output, input_vars, selected_params):
 
     print(f"Configuration files saved in {folder_path}")
 
-# def generate_config_spf():
-# tbd
+    os.startfile(folder_path)
+
+
+def generate_config_spf_custom1(folder_output, input_vars, selected_params, filetransfer=False):
+    filename = "CFG_INL.SPF"
+    filename2 = "_N_CFG_INL_SPF"
+
+    # Get the current timestamp for folder name (format: YYMMDD_HHmmSS)
+    timestamp = time.strftime("%y%m%d_%H%M%S")
+    folder_path = os.path.join(folder_output, f"{timestamp}")
+
+    # Create the folder with the timestamp
+    if not os.path.exists(folder_path):
+        os.makedirs(folder_path)
+
+    # Define the file path for the SPF configuration file
+    spf_file_path = os.path.join(folder_path, filename)
+    xlsx_path = "cfg_inlay_PUTx.xlsx"
+
+    # Extract grid parameters
+    x_num = int(input_vars['inlay']['INL_X_NUM'].get())  # Number of columns
+    y_num = int(input_vars['inlay']['INL_Y_NUM'].get())  # Number of rows
+    x_offset = float(input_vars['inlay']['INL_X_OFFSET'].get())  # X offset
+    y_offset = float(input_vars['inlay']['INL_Y_OFFSET'].get())  # Y offset
+
+    # Check if Excel file exists, if not create it with 'x' values
+    if not os.path.exists(xlsx_path):
+        df = pd.DataFrame("x", index=range(x_num), columns=range(y_num))
+        df.to_excel(xlsx_path, index=False, header=False)
+
+    # Load Excel file
+    df = pd.read_excel(xlsx_path, header=None, dtype=str).fillna("")
+    df = df.reindex(range(x_num), fill_value=0).reindex(columns=range(y_num), fill_value=0)
+    df = df.map(lambda x: 1 if str(x).strip().lower() == "x" else 0)
+
+    # Generate the SPF file content
+    with open(spf_file_path, "w") as spf_file:
+        spf_file.write(f"; CFG FILE FOR DMU50 AUTOMATION\n")
+        spf_file.write(f"; GENERATED: {timestamp}\n")
+        spf_file.write("; ---------------------------------------------------\n")
+
+        # Write WP_X[i] and WP_Y[i] values
+        cnt = 0
+        for j in range(y_num):  # Rows
+            for i in range(x_num):  # Columns
+                if df.iloc[i, j] == 1:  # Consider only marked positions
+                    spf_file.write(f"WP_X[{cnt}]={x_offset * i}\n")
+                    spf_file.write(f"WP_Y[{cnt}]={y_offset * j}\n")
+                    cnt += 1
+        spf_file.write(f"WP_NUM={cnt}\n")
+        spf_file.write(f"M17\n")
+        spf_file.write("\n; ---------------------------------------------------\n")
+
+    print(f"Configuration file saved at: {spf_file_path}")
+
+    if filetransfer:
+        spf_file_path2 = os.path.join(folder_path, filename2)
+        shutil.copyfile(spf_file_path, spf_file_path2)
+
+        # try:
+        # Transfer to Sinumerik
+        url2 = "192.168.214.1"
+        ssh_username = "manufact"
+        ssh_password = "SUNRISE"
+        upload_folder_nc = "/nckfs/_N_MPF_DIR/_N_AUTO_ROB_DIR"
+
+        ssh = paramiko.SSHClient()
+        ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
+        ssh.connect(url2, username=ssh_username, password=ssh_password)
+        sftp = ssh.open_sftp()
+        sftp.chdir(upload_folder_nc)
+        if filename2 in sftp.listdir():
+            sftp.remove(filename2)
+        sftp.put(spf_file_path2, filename2)
+        sftp.close()
+        ssh.close()
+
+        os.remove(spf_file_path2)
+
+        print(f"------->>>> FILE TRANSFERED TO SINUMERIK ------->>>> ")
+        # except Exception as e:
+        #    print(f"ERROR IN FILETRANSFER {e}")
+    else:
+        os.startfile(folder_path)

funct_inlay.py

@@ -4,47 +4,56 @@ import numpy as np
 def generate_picture_inlay(all_group_vars, picture_path, DEBUG=False):
     try:
         vars = all_group_vars['inlay']
-        x_num, y_num = int(vars['x_num']), int(vars['y_num'])
-        x_offset_mm, y_offset_mm = float(vars['x_offset']), float(vars['y_offset'])
-        canvas_width_mm, canvas_height_mm = 800, 1200
+        x_num, y_num = int(vars['INL_X_NUM']), int(vars['INL_Y_NUM'])
+        x_offset_mm, y_offset_mm = float(vars['INL_X_OFFSET']), float(vars['INL_Y_OFFSET'])
+
+        if x_num <= 0 or y_num <= 0:
+            raise ValueError("INL_X_NUM and INL_Y_NUM must be positive integers.")
+
+
+        rect_realsize_factor = 0.90
+        canvas_height_mm = x_num * x_offset_mm - x_offset_mm * (1-rect_realsize_factor)
+        canvas_width_mm = y_num * y_offset_mm - y_offset_mm * (1-rect_realsize_factor)
+
         x_offset = x_offset_mm / canvas_height_mm  # Swapping due to axis swap
         y_offset = y_offset_mm / canvas_width_mm   # Swapping due to axis swap
 
-        if x_num <= 0 or y_num <= 0:
-            raise ValueError("x_num and y_num must be positive integers.")
+
+        x_wide = x_offset * rect_realsize_factor
+        y_wide = y_offset * rect_realsize_factor
+
 
         fig, ax = plt.subplots(figsize=(12, 8))
         ax.set_facecolor('black')
 
-        total_x_offset = x_offset * (y_num + 1)
-        total_y_offset = y_offset * (x_num + 1)
-        rect_width = (1 - total_y_offset) / x_num
-        rect_height = (1 - total_x_offset) / y_num
-
-        for j in range(x_num):
-            for i in range(y_num):
+        for xxx in range(x_num):
+            for yyy in range(y_num):
                 # Mirroring horizontally
-                x_start = 1 - (y_offset + i * (rect_height + y_offset) + rect_height)
-                y_start = x_offset + j * (rect_width + x_offset)
+                x_start = xxx * x_offset
+                y_start = ((yyy) * y_offset)  # Corrected vertical mirroring
 
-                rect = plt.Rectangle((x_start, y_start), rect_height, rect_width, color='white')
+                rect = plt.Rectangle((y_start, x_start), y_wide, x_wide, color='white')
                 ax.add_patch(rect)
 
+                triangle_sizefactor = 0.2
                 triangle = plt.Polygon([
-                    (x_start + rect_height, y_start),  # Bottom right of the rectangle
-                    (x_start + rect_height - 0.05 * rect_height, y_start),  # Left along the bottom
-                    (x_start + rect_height, y_start + 0.05 * rect_width)  # Up from the bottom right
+                    (y_start+y_wide,                       x_start),  # Bottom right of the rectangle
+                    (y_start+y_wide,                       x_start  + triangle_sizefactor * y_wide),  # Left along the bottom
+                    (y_start+y_wide - triangle_sizefactor * y_wide,       x_start )  # Up from the bottom right
                 ], color='black')
                 ax.add_patch(triangle)
 
         # Arrows with adjusted margins
-        ax.arrow(0.98, 0.02, -0.9, 0, head_width=0.03, head_length=0.02, fc='green', ec='green', linewidth=2, edgecolor='white')
-        ax.arrow(0.98, 0.02, 0, 0.9, head_width=0.02, head_length=0.03, fc='red', ec='red', linewidth=2, edgecolor='white')
+        ax.arrow(1.0, 0.0, -0.3, 0, head_width=0.03, head_length=0.02, fc='green', ec='green', linewidth=2, edgecolor='white')
+        ax.arrow(1.0, 0.0, 0, 0.3, head_width=0.02, head_length=0.03, fc='red', ec='red', linewidth=2, edgecolor='white')
 
-        ax.set_xlim(0, 1)
-        ax.set_ylim(0, 1)
+        margin = 0.03
+        ax.set_xlim(0-margin, 1+margin)
+        ax.set_ylim(0-margin, 1+margin)
         ax.set_xticks([]), ax.set_yticks([])
-        plt.subplots_adjust(left=0.1, right=0.9, top=0.9, bottom=0.1)  # Adjusting the margins
+        # plt.subplots_adjust(left=0.01, right=0.99, top=0.99, bottom=0.01)  # Adjusting the margins
+        # ax.set_xlim(1, 0)  # Flipping the x-axis
+        # ax.set_ylim(1, 0)  # Flipping the y-axis
 
         if DEBUG:
             plt.show()
@@ -58,6 +67,6 @@ def generate_picture_inlay(all_group_vars, picture_path, DEBUG=False):
         print(f"Error generating matrix: {e}")
 
 if __name__ == "__main__":
-    vars = {'x_num': 5, 'y_num': 3, 'x_offset': 20, 'y_offset': 20}
+    vars = {'INL_X_NUM': 8, 'INL_Y_NUM': 12, 'INL_X_OFFSET': 100, 'INL_Y_OFFSET': 125}
     picture_path = "cfg_picture/TEST_inlay.jpg"
     generate_picture_inlay({'inlay': vars}, picture_path, DEBUG=True)

funct_wp.py

@@ -1,142 +1,165 @@
 import matplotlib.pyplot as plt
-from mpl_toolkits.mplot3d.art3d import Poly3DCollection
-import numpy as np
+from functions import *
 
 
-def generate_picture_wpraw(all_group_vars, picture_path, DEBUG=False):
-    try:
-        # --- wpraw
-        vars = all_group_vars['wp_raw']
-        x, y, z = float(vars['x_wpraw']), float(vars['y_wpraw']), float(vars['z_wpraw'])
-        if min(x, y, z) <= 0:
+def generate_picture_wp(all_group_vars, picture_path, DEBUG=False):
+    vars = all_group_vars['wp']
+    WPR_X, WPR_Y, WPR_Z, WPF_X, WPF_Y, WPF_Z, WP_CLP_OFFSET_X, WP_GRP_OFFSET_Z = (float(vars[k]) for k in
+                                                                                  ['WPR_X', 'WPR_Y', 'WPR_Z', 'WPF_X',
+                                                                                   'WPF_Y', 'WPF_Z', 'WP_CLP_OFFSET_X',
+                                                                                   'WP_GRP_OFFSET_Z'])
+
+    if min(WPR_X, WPR_Y, WPR_Z, WPF_X, WPF_Y, WPF_Z) <= 0:
         raise ValueError("Dimensions must be positive.")
 
     fig, ax = plt.subplots(subplot_kw={'projection': '3d'})
-        x_cube, y_cube = 2 * x, 2 * y
-        vertices = np.array([[0, 0, 0], [x_cube, 0, 0], [x_cube, y_cube, 0], [0, y_cube, 0],
-                             [0, 0, z], [x_cube, 0, z], [x_cube, y_cube, z], [0, y_cube, z]])
-        faces = [vertices[[0, 1, 2, 3]], vertices[[4, 5, 6, 7]], vertices[[0, 3, 7, 4]],
-                 vertices[[1, 2, 6, 5]], vertices[[0, 1, 5, 4]], vertices[[2, 3, 7, 6]]]
 
-        ax.add_collection3d(Poly3DCollection(faces, facecolors='k', linewidths=1, edgecolors='k', alpha=.15))
-        ax.set_box_aspect([x_cube, y_cube, z])
-        ax.set_xticks([]);
-        ax.set_yticks([]);
-        ax.set_zticks([])
-        ball_radius = min(x, y, z) * 0.1
-        u, v = np.linspace(0, 2 * np.pi, 20), np.linspace(0, np.pi, 20)
-        x_sphere = x + ball_radius * np.outer(np.cos(u), np.sin(v))
-        y_sphere = y + ball_radius * np.outer(np.sin(u), np.sin(v))
-        z_sphere = z + ball_radius * np.outer(np.ones_like(u), np.cos(v))
-        ax.plot_surface(x_sphere, y_sphere, z_sphere, color='r', alpha=1)
+    # Define raw workpiece dimensions
+    x_cube, y_cube, z_cube = 2 * WPR_X, 2 * WPR_Y, WPR_Z
+    vertices_raw = np.array([[0, 0, 0], [x_cube, 0, 0], [x_cube, y_cube, 0], [0, y_cube, 0],
+                             [0, 0, WPR_Z], [x_cube, 0, WPR_Z], [x_cube, y_cube, WPR_Z], [0, y_cube, WPR_Z]])
+    faces_raw = [vertices_raw[[0, 1, 2, 3]], vertices_raw[[4, 5, 6, 7]], vertices_raw[[0, 3, 7, 4]],
+                 vertices_raw[[1, 2, 6, 5]], vertices_raw[[0, 1, 5, 4]], vertices_raw[[2, 3, 7, 6]]]
 
-        max_size = max(x_cube, y_cube, z) * 0.3
-        ax.quiver(0, 0, 0, max_size, 0, 0, color='r', linewidth=5)
-        ax.quiver(0, 0, 0, 0, max_size, 0, color='g', linewidth=5)
-        ax.quiver(0, 0, 0, 0, 0, max_size, color='b', linewidth=5)
+    # Set axis properties
+    ax.set_box_aspect([x_cube, y_cube, z_cube])
+    ax.set(xticks=[], yticks=[], zticks=[])
 
-        block_depth = y * 0.4
-        ax.bar3d(-max_size, (y_cube - block_depth) * 0.5, z * 0.8, max_size, block_depth, z * 0.8, color='k', alpha=.25)
-        ax.bar3d(x_cube, (y_cube - block_depth) * 0.5, z * 0.8, max_size, block_depth, z * 0.8, color='k', alpha=.25)
+    # Draw WP coordinate system
+    axis_len = max(x_cube, y_cube, z_cube) * 0.2
+    colors = ['r', 'g', 'b']
+    origin_x = 0
+    origin_y = 0
+    origin_z = 0
+    for i, vec in enumerate(np.eye(3)):
+        ax.quiver(origin_x, origin_y, origin_z, *(axis_len * vec), color=colors[i], linewidth=3)
+    ax.text(origin_x, origin_y, origin_z - axis_len * 0.3, 'WP', color='black', fontsize=9, weight='bold', ha='center',
+            va='top')
 
+    # Draw WP
+    ax.add_collection3d(Poly3DCollection(faces_raw, facecolors='k', linewidths=1, edgecolors='k', alpha=.15))
 
+    # Draw gripping point
+    u, v = np.mgrid[0:2 * np.pi:20j, 0:np.pi:20j]
+    ball_radius = min(WPR_X, WPR_Y, WPR_Z) * 0.1
+    ax.plot_surface(
+        WPR_X + ball_radius * np.cos(u) * np.sin(v),
+        WPR_Y + ball_radius * np.sin(u) * np.sin(v),
+        WPR_Z + ball_radius * np.cos(v),
+        color='r'
+    )
 
-        ax.view_init(elev=18, azim=-130)
-        ax.set_xlim([0, x_cube]); ax.set_ylim([0, y_cube]); ax.set_zlim([0, z])
+    # Draw gripper
+    gripper_thickness = max(x_cube, y_cube, z_cube) * 0.1
+    gripper_wide = WPR_X * 0.4
+    GRP_ALPHA = .40
+    bars = [
+        ((x_cube - gripper_wide) * 0.5, -gripper_thickness, WPR_Z - WP_GRP_OFFSET_Z),
+        ((x_cube - gripper_wide) * 0.5, y_cube, WPR_Z - WP_GRP_OFFSET_Z),
+    ]
+    for (x, y, z) in bars:
+        ax.bar3d(
+            x, y, z,
+            gripper_wide, gripper_thickness, 5 * WPR_Z + WP_GRP_OFFSET_Z,
+            color='r', alpha=GRP_ALPHA, edgecolor='k', linewidth=0.5
+        )
+
+    # Define finished workpiece dimensions
+    x_cube2, y_cube2, z_cube2 = 2 * WPF_X, 2 * WPF_Y, WPF_Z
+
+    # Draw gripping point for finished workpiece
+    u, v = np.mgrid[0:2 * np.pi:20j, 0:np.pi:20j]
+    ball_radius = min(WPF_X, WPF_Y, WPF_Z) * 0.08
+    ax.plot_surface(
+        WPF_X + ball_radius * np.cos(u) * np.sin(v),
+        WPF_Y + ball_radius * np.sin(u) * np.sin(v),
+        WPF_Z + ball_radius * np.cos(v),
+        color='g'
+    )
+
+    # Draw gripper for finished workpiece
+    gripper_thickness2 = max(x_cube, y_cube, z_cube) * 0.05
+    gripper_wide2 = WPR_X * 0.4
+    GRP_ALPHA2 = .25
+    yyy2 = [-gripper_thickness2, y_cube2] if WPF_Y < WPR_Y else [-gripper_thickness2 + (WPF_Y - WPR_Y) * 2, y_cube]
+    bars = [
+        ((x_cube2 - gripper_wide2) * 0.5, yyy2[0], WPF_Z - WP_GRP_OFFSET_Z),
+        ((x_cube2 - gripper_wide2) * 0.5, yyy2[1], WPF_Z - WP_GRP_OFFSET_Z),
+    ]
+    for (x, y, z) in bars:
+        ax.bar3d(
+            x, y, z,
+            gripper_wide2, gripper_thickness2, 5 * WPF_Z + WP_GRP_OFFSET_Z,
+            color='g', alpha=GRP_ALPHA2, edgecolor='k', linewidth=0.5
+        )
+
+    # Draw CLP coordinate system
+    axis_len = max(x_cube, y_cube, z_cube) * 0.15
+    colors = ['r', 'g', 'b']
+    origin_x = WPR_X - WP_CLP_OFFSET_X
+    origin_y = WPR_Y
+    origin_z = 0
+    for i, vec in enumerate(np.eye(3)):
+        ax.quiver(origin_x, origin_y, origin_z, *(axis_len * vec), color=colors[i], linewidth=3)
+    ax.text(origin_x, origin_y, origin_z - axis_len * 0.3, 'CLP', color='blue', fontsize=9, weight='bold', ha='center',
+            va='top')
+
+    # Define clamping block dimensions
+    clp_height = z_cube * 0.2
+    clp_width = 0.6 * x_cube
+    clp_deep = y_cube * 0.3
+    clp_supportdeep = 3
+    base_x = WPR_X - clp_width / 2
+    alpha = 0.35
+    color = 'blue'
+    linewidth = 1
+
+    # Draw clamping blocks
+    x = base_x - WP_CLP_OFFSET_X
+    dx = clp_width
+    y = 0
+    dy1 = clp_deep
+    dy2 = clp_supportdeep
+    z = 0
+    dz1 = z_cube * 0.2
+    dz2 = z_cube * 0.6
+    plot_clamping(ax, x, y, z, dx, dy1, dy2, dz1, dz2, color=color,
+                  alpha=alpha, linewidth=linewidth)
+    y = y_cube
+    plot_clamping(ax, x, y, z, dx, dy1, dy2, dz1, dz2, color=color,
+                  alpha=alpha, linewidth=linewidth, inverty=True)
+
+    # Set view properties
+    z_trans = WPR_Z*0.2
+    zoom_factor = 1.1  # Adjust this factor to zoom out more or less
+    ax.view_init(elev=30, azim=-160)
+    ax.set_xlim([-x_cube * zoom_factor * 0.1, x_cube * zoom_factor])
+    ax.set_ylim([-y_cube * zoom_factor * 0.1, y_cube * zoom_factor])
+    ax.set_zlim([-WPR_Z * zoom_factor * 0.1 - z_trans, WPR_Z * zoom_factor - z_trans])
     ax.set_aspect('auto')
+    ax.grid(False)  # Remove grid lines
+    ax.set_xticks([])
+    ax.set_yticks([])
+    ax.set_zticks([])
+    for axis in [ax.xaxis, ax.yaxis, ax.zaxis]:
+        axis.set_pane_color((1, 1, 1, 0))  # Hide background panes
+        axis.line.set_color((1, 1, 1, 0))  # Hide axis lines
 
+    # Save or display the plot
     if not DEBUG:
         fig.savefig(picture_path, bbox_inches='tight', dpi=300, transparent=True)
     else:
         plt.show()
     plt.close()
 
-    except Exception as e:
-        print(f"An error occurred: {e}")
-
-
-def generate_picture_wpfin(all_group_vars, picture_path, DEBUG=False):
-    try:
-        # --- wpraw
-        vars = all_group_vars['wp_raw']
-        x, y, z = float(vars['x_wpraw']), float(vars['y_wpraw']), float(vars['z_wpraw'])
-        if min(x, y, z) <= 0:
-            raise ValueError("Dimensions must be positive.")
-
-        fig, ax = plt.subplots(subplot_kw={'projection': '3d'})
-        x_cube, y_cube = 2 * x, 2 * y
-        vertices = np.array([[0, 0, 0], [x_cube, 0, 0], [x_cube, y_cube, 0], [0, y_cube, 0],
-                             [0, 0, z], [x_cube, 0, z], [x_cube, y_cube, z], [0, y_cube, z]])
-        faces = [vertices[[0, 1, 2, 3]], vertices[[4, 5, 6, 7]], vertices[[0, 3, 7, 4]],
-                 vertices[[1, 2, 6, 5]], vertices[[0, 1, 5, 4]], vertices[[2, 3, 7, 6]]]
-
-        ax.add_collection3d(Poly3DCollection(faces, facecolors='k', linewidths=1, edgecolors='k', alpha=.15))
-        ax.set_box_aspect([x_cube, y_cube, z])
-        ax.set_xticks([]);
-        ax.set_yticks([]);
-        ax.set_zticks([])
-        ball_radius = min(x, y, z) * 0.1
-        u, v = np.linspace(0, 2 * np.pi, 20), np.linspace(0, np.pi, 20)
-        x_sphere = x + ball_radius * np.outer(np.cos(u), np.sin(v))
-        y_sphere = y + ball_radius * np.outer(np.sin(u), np.sin(v))
-        z_sphere = z + ball_radius * np.outer(np.ones_like(u), np.cos(v))
-        ax.plot_surface(x_sphere, y_sphere, z_sphere, color='r', alpha=1)
-
-
-        # --- wprfin
-        vars = all_group_vars['wp_fin']
-        x, y, z, l = float(vars['x_wpfin']), float(vars['y_wpfin']), float(vars['z_wpfin']), float(vars['l_wpfin'])
-        if min(x, y, z, l) <= 0:
-            raise ValueError("Dimensions must be positive.")
-
-        fig, ax = plt.subplots(subplot_kw={'projection': '3d'})
-        x_offset = x - l / 2
-        vertices = np.array([[0, 0, 0], [l, 0, 0], [l, 2 * y, 0], [0, 2 * y, 0],
-                             [0, 0, z], [l, 0, z], [l, 2 * y, z], [0, 2 * y, z]]) + np.array([x_offset, 0, 0])
-        faces = [vertices[[0, 1, 2, 3]], vertices[[4, 5, 6, 7]], vertices[[0, 3, 7, 4]],
-                 vertices[[1, 2, 6, 5]], vertices[[0, 1, 5, 4]], vertices[[2, 3, 7, 6]]]
-
-        ax.add_collection3d(Poly3DCollection(faces, facecolors='k', linewidths=1, edgecolors='k', alpha=.15))
-        ball_radius = min(x, y, z) * 0.1
-        u, v = np.linspace(0, 2 * np.pi, 20), np.linspace(0, np.pi, 20)
-        x_sphere = x + ball_radius * np.outer(np.cos(u), np.sin(v))
-        y_sphere = y + ball_radius * np.outer(np.sin(u), np.sin(v))
-        z_sphere = z + ball_radius * np.outer(np.ones_like(u), np.cos(v))
-        ax.plot_surface(x_sphere, y_sphere, z_sphere, color='blue', alpha=1)
-
-        max_size = max(l, 2 * y, z) * 0.3
-        ax.quiver(0, 0, 0, max_size, 0, 0, color='red', linewidth=5)
-        ax.quiver(0, 0, 0, 0, max_size, 0, color='green', linewidth=5)
-        ax.quiver(0, 0, 0, 0, 0, max_size, color='blue', linewidth=5)
-
-        block_depth = y * 0.4
-        ax.bar3d(-max_size + x_offset, (2 * y - block_depth) * 0.5, z * 0.8, max_size, block_depth, z * 0.8,
-                 color='black', alpha=.25)
-        ax.bar3d(l + x_offset, (2 * y - block_depth) * 0.5, z * 0.8, max_size, block_depth, z * 0.8, color='black',
-                 alpha=.25)
-
-        ax.view_init(elev=18, azim=-130)
-        ax.set_xticks([]);
-        ax.set_yticks([]);
-        ax.set_zticks([])
-        ax.set_xlim([0, l + x_offset]);
-        ax.set_ylim([0, 2 * y]);
-        ax.set_zlim([0, z])
-        ax.set_aspect('equal')
-
-        if not DEBUG:
-            fig.savefig(picture_path, bbox_inches='tight', dpi=300, transparent=True)
-        else:
-            plt.show()
-        plt.close()
-
-    except Exception as e:
-        print(f"An error occurred: {e}")
-
 
 if __name__ == "__main__":
-    vars = {'x_wpraw': 10, 'y_wpraw': 15, 'z_wpraw': 20}
-    generate_picture_wpraw({'wp_raw': vars}, "cfg_picture/TEST_wpraw.jpg", DEBUG=True)
-
-    vars = {'x_wpfin': 10, 'y_wpfin': 20, 'z_wpfin': 20, 'l_wpfin': 10}
-    generate_picture_wpfin({'wp_fin': vars}, "cfg_picture/TEST_wpfin.jpg", DEBUG=True)
+    vars = {'WPR_X': 20,
+            'WPR_Y': 15,
+            'WPR_Z': 20,
+            'WPF_X': 10,
+            'WPF_Y': 18,
+            'WPF_Z': 15,
+            'WP_CLP_OFFSET_X': 3,
+            'WP_GRP_OFFSET_Z': 5}
+    generate_picture_wp({'wp': vars}, "cfg_picture/TEST_wpraw.jpg", DEBUG=True)

functions.py

@@ -5,6 +5,9 @@ from PIL import Image, ImageTk
 from tkinter import ttk, filedialog, messagebox
 import tkinter as tk
 import os
+import trimesh
+from mpl_toolkits.mplot3d.art3d import Poly3DCollection
+import numpy as np
 
 # Function to load object definitions from YAML
 
@@ -87,3 +90,40 @@ def create_new_param_popup(root, group_name, input_vars, param_values, param_dro
         new_window.destroy()
 
     tk.Button(new_window, text="Create", command=create_param_set).pack(pady=10)
+
+
+# -------------------------------------------------------------------------------------------------------
+def plot_clamping(ax, x, y, z, dx, dy1, dy2, dz1, dz2, color='blue', alpha=0.5, linewidth=1, inverty=False):
+    """Efficiently plots an L-shaped merged cube structure and draws only axis-aligned edges."""
+
+    # Compute Y offsets
+    dyy1, dyy2 = (y - dy1 / 2, y - (dy1 - dy2) / 2) if not inverty else (y + dy1 / 2, y + (dy1 - dy2) / 2)
+
+    # Create and position both cubes
+    cubes = [
+        trimesh.creation.box(extents=[dx, dy1, dz1]).apply_translation([x + dx / 2, dyy1, z + dz1 / 2]),
+        trimesh.creation.box(extents=[dx, dy1 + dy2, dz2]).apply_translation([x + dx / 2, dyy2, z - dz2 / 2])
+    ]
+
+    try:
+        # Perform boolean union on merged cubes
+        merged = trimesh.boolean.union(cubes)
+
+        # Extract vertices and edges
+        vertices = np.array(merged.vertices)
+        edges = merged.edges_unique
+
+        # Add merged faces without visible edges
+        ax.add_collection3d(Poly3DCollection(
+            vertices[merged.faces], facecolors=color, alpha=alpha, edgecolors=None, linewidth=0
+        ))
+
+        # Draw only axis-aligned edges
+        for edge in edges:
+            v1, v2 = vertices[edge]
+            if np.isclose(v1, v2, atol=1e-6).sum() == 2:  # Only one coordinate changes
+                ax.plot(*zip(*[v1, v2]), color='black', linewidth=linewidth)
+
+    except Exception as e:
+        print(f"Trimesh union failed: {e}")
+

out/241016_164629/DMUAUT_CFG.SPF

@@ -1,29 +0,0 @@
-; CFG FILE FOR DMU50 AUTOMATION
-; GENERATED: 241016_164629
-; ---------------------------------------------------
-X_NUM = 8
-X_OFFSET = 5
-Y_NUM = 7
-Y_OFFSET = 4
-KOS = 4
-
-; ---------------------------------------------------
-X_WPRAW = 10
-Y_WPRAW = 1
-Z_WPRAW = 1
-
-; ---------------------------------------------------
-X_WPFIN = 
-Y_WPFIN = 
-Z_WPFIN = 
-L_WPFIN = 
-
-; ---------------------------------------------------
-HUB = 10
-H_OFFSET = 20
-H_STEP = 5
-W_OFFSET = 20
-W_STEP = 10
-STEPS_NUM = 6
-
-; ---------------------------------------------------

out/241016_164629/selected_param_sets.txt

@@ -1,5 +0,0 @@
-Selected Parameter Sets:
-inlay: inlay7
-wp_raw: wpraw1
-wp_fin: <<new par set>>
-grp: grp1

out/241017_101415/DMUAUT_CFG.SPF

@@ -1,29 +0,0 @@
-; CFG FILE FOR DMU50 AUTOMATION
-; GENERATED: 241017_101415
-; ---------------------------------------------------
-X_NUM = 11
-X_OFFSET = 5
-Y_NUM = 4
-Y_OFFSET = 4
-KOS = 4
-
-; ---------------------------------------------------
-X_WPRAW = 10
-Y_WPRAW = 10
-Z_WPRAW = 20
-
-; ---------------------------------------------------
-X_WPFIN = 10
-Y_WPFIN = 10
-Z_WPFIN = 20
-L_WPFIN = 10
-
-; ---------------------------------------------------
-HUB = 10
-H_OFFSET = 20
-H_STEP = 5
-W_OFFSET = 20
-W_STEP = 10
-STEPS_NUM = 6
-
-; ---------------------------------------------------

out/241017_101415/selected_param_sets.txt

@@ -1,5 +0,0 @@
-Selected Parameter Sets:
-inlay: inlay4
-wp_raw: wpraw1
-wp_fin: wpfin1
-grp: grp1

out/241017_103326/DMUAUT_CFG.SPF

@@ -1,29 +0,0 @@
-; CFG FILE FOR DMU50 AUTOMATION
-; GENERATED: 241017_103326
-; ---------------------------------------------------
-X_NUM = 7
-X_OFFSET = 5
-Y_NUM = 4
-Y_OFFSET = 4
-KOS = g54
-
-; ---------------------------------------------------
-X_WPRAW = 5
-Y_WPRAW = 5
-Z_WPRAW = 15
-
-; ---------------------------------------------------
-X_WPFIN = 10
-Y_WPFIN = 10
-Z_WPFIN = 13
-L_WPFIN = 8
-
-; ---------------------------------------------------
-HUB = 10
-H_OFFSET = 10
-H_STEP = 5
-W_OFFSET = 25
-W_STEP = 4
-STEPS_NUM = 6
-
-; ---------------------------------------------------

out/241017_103326/selected_param_sets.txt

@@ -1,5 +0,0 @@
-Selected Parameter Sets:
-inlay: inlay_kleinteil
-wp_raw: wpraw2
-wp_fin: wpfin1
-grp: grp1

out/241017_180108/DMUAUT_CFG.SPF

@@ -1,32 +0,0 @@
-; CFG FILE FOR DMU50 AUTOMATION
-; GENERATED: 241017_180108
-; ---------------------------------------------------
-X_NUM = 8
-X_OFFSET = 5
-Y_NUM = 7
-Y_OFFSET = 4
-KOS = 4
-
-; ---------------------------------------------------
-X_WPRAW = 10
-Y_WPRAW = 10
-Z_WPRAW = 20
-
-; ---------------------------------------------------
-X_WPFIN = 10
-Y_WPFIN = 10
-Z_WPFIN = 13
-L_WPFIN = 8
-
-; ---------------------------------------------------
-HUB = 50
-H_OFFSET = 30
-H_STEP = 10
-W_OFFSET = 40
-W_STEP = 45
-STEPS_NUM = 5
-
-; ---------------------------------------------------
-CLP_OFFSET = 
-
-; ---------------------------------------------------

out/241017_180108/selected_param_sets.txt

@@ -1,6 +0,0 @@
-Selected Parameter Sets:
-inlay: inlay7
-wp_raw: wpraw1
-wp_fin: wpfin1
-grp: grp1
-clp: <<new par set>>

out/241017_181437/DMUAUT_CFG.SPF

@@ -1,32 +0,0 @@
-; CFG FILE FOR DMU50 AUTOMATION
-; GENERATED: 241017_181437
-; ---------------------------------------------------
-X_NUM = 8
-X_OFFSET = 5
-Y_NUM = 7
-Y_OFFSET = 4
-KOS = 4
-
-; ---------------------------------------------------
-X_WPRAW = 5
-Y_WPRAW = 5
-Z_WPRAW = 15
-
-; ---------------------------------------------------
-X_WPFIN = 10
-Y_WPFIN = 10
-Z_WPFIN = 13
-L_WPFIN = 8
-
-; ---------------------------------------------------
-HUB = 50
-H_OFFSET = 30
-H_STEP = 10
-W_OFFSET = 40
-W_STEP = 45
-STEPS_NUM = 5
-
-; ---------------------------------------------------
-CLP_OFFSET = 0
-
-; ---------------------------------------------------

out/241017_181437/selected_param_sets.txt

@@ -1,6 +0,0 @@
-Selected Parameter Sets:
-inlay: inlay7
-wp_raw: wpraw2
-wp_fin: wpfin1
-grp: grp1
-clp: clp2

out/241017_184239/DMUAUT_CFG.SPF

@@ -1,32 +0,0 @@
-; CFG FILE FOR DMU50 AUTOMATION
-; GENERATED: 241017_184239
-; ---------------------------------------------------
-X_NUM = 
-X_OFFSET = 
-Y_NUM = 
-Y_OFFSET = 
-KOS = 
-
-; ---------------------------------------------------
-X_WPRAW = 10
-Y_WPRAW = 10
-Z_WPRAW = 20
-
-; ---------------------------------------------------
-X_WPFIN = 10
-Y_WPFIN = 10
-Z_WPFIN = 13
-L_WPFIN = 8
-
-; ---------------------------------------------------
-HUB = 10
-H_OFFSET = 10
-H_STEP = 5
-W_OFFSET = 25
-W_STEP = 45
-STEPS_NUM = 2
-
-; ---------------------------------------------------
-CLP_OFFSET = 4
-
-; ---------------------------------------------------

out/241017_184239/selected_param_sets.txt

@@ -1,6 +0,0 @@
-Selected Parameter Sets:
-inlay: <<new par set>>
-wp_raw: wpraw1
-wp_fin: wpfin1
-grp: grp3
-clp: clp1